| Problem Reports |
|---|
| PR Number | Times | Time Lost | Description | Response |
|---|
| 4385 | 01:51-01:57 | 00:06 | This error showed up on the TCS Gui when I tried to move the the dome:
{
"__exception_type": 18,
"__exception_string": "Status command failed",
"__exception_file": "src/legacyDomeSubSystem.cpp",
"__exception_line": 594,
"__exception_func": "getStatus",
...
and the dome would not not move.
I aborted the move and killed -9 the TCS Gui and restarted. | |
| 4386 | 06:15-06:21 | 00:06 | TCS Gui crashed, the Trajectory did not move from "Next" to "Brightest" in 89.4600 AZ. I killed the TCS Gui and restarted. | |
| 4387 | 07:26-07:35 | 00:09 | There was a HFC software and hardware fault. I killed the TCS gui, then I hit the three resets on the Tracker Monitor software. The I hit the reset on the the hardware Tracker display panel. Then I restarted the TCS gui. | |
| 4388 | 07:45-10:30 | 02:45 | On the hardware Tracker display panel the following lights went red: Watchdog, CFD, LIMITS, HFC, TRK FAULT.I went downstairs in the basement. Their were no warning lights. I checked the server computers, one said "Power Edge R515 Lost AC Power Check PSU Cable E 61C Supply 750 W and both computers were dead. I called Jim Fowler, he said it might be a UPS problem. | |