|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stack Data | Did not stack | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Problem Reports | ||||
|---|---|---|---|---|
| PR Number | Times | Time Lost | Description | Response |
| 3991 | 06:40-07:00, 04:30 - 04:55 | 00:45 | Twice during the night running dmittc at 135 aborted before the track started, and both times afterward the Master Fault light on control desk was blinking. I was not able to recover from the error by resetting the faults on control desk. Had to shut down + restart servo cabinets and dSPACE. | |
| Ops Comments | none |
|---|
| TO Comments | Got decent stack but did not take measurement due to radar. Took dmittc data at 45, 90, 180-- the second data set at 180 should be good, but a SAMS error threw off the stack during the first data set. Az 135 produced problems every time. |
|---|
| RA Comments | none |
|---|
| Observations | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| File | Target/QID | Exp Start | Exposure | Overhead | Program | Instrument Configuration | Data Type | IQ | Dimm | SkySBrt | Skytrans | SNR | Comments | Charge | |