|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stack Data | Did not stack | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Problem Reports | ||||
|---|---|---|---|---|
| PR Number | Times | Time Lost | Description | Response |
| 4002 | 09:00-09:00 | 00:00 | Even after shutting down and restarting both servo cabinets and dSPACE, after initializing in TCS both Master Fault and HFC lights were red. After resetting Master and HFC faults attempting to move tracker produces error message that is saved on Jove desktop in errormessage.png and attached. | |
| 4003 | 09:00-09:00 | 00:00 | When attempting to run dmittc at 67 and 315, after slewing to start of track Master Fault light alternates between red and green on Control Desk/Tracker Operations. Similar to 3991. Tested other azimuths after this problem occurred and they worked fine, but could not get tracker to initialize normally afterward ala 4002 Also, still did not work after restarting dSPACE & servo cabinets. | |
| Ops Comments | none |
|---|
| TO Comments | Took dmittc data at 45 and 179. Repeated 45 because found unkilled processes with chksys, which I forgot to run before running 45 the first time. To humid, rainy to open. |
|---|
| RA Comments | none |
|---|
| Observations | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| File | Target/QID | Exp Start | Exposure | Overhead | Program | Instrument Configuration | Data Type | IQ | Dimm | SkySBrt | Skytrans | SNR | Comments | Charge | |