|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stack Data | Did not stack | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Problem Reports | ||||
|---|---|---|---|---|
| PR Number | Times | Time Lost | Description | Response |
| 4077 | 03:23-03:23 | 00:00 | TCS GUI crashed to desktop upon clicking the Retract ACQ mirror; after bringing TCS back up, clicking Retract ACQ mirror gave a popup error box instead of crashing. | Restarted TCS |
| 4064 | 06:48-06:48, 08:40 - 08:40 | 00:00 | TCS became very, very slow | Restarted |
| 4078 | 08:32-08:32, 10:30 - 10:30 | 00:00 | Upon moving to point 21 of the 97 point test, moveToPoint 20 -1186.31572 1186.31572 slewing... Can not move to point index = 20 X = -1186.315720 Y = 1186.315720 Tried like 20 again, then 21, 22, 23, 24 and no dice. Gonna try restart TCS | Okay, that worked. Also TCS had slowed to a crawl when I went to exit it, so that may have had something to do with it. Second instance TCS wasn't particularly slow, but restarting it did make mountTest happier. At least for a few points... Hey! If you watch it, even though it tells you it can't go to that point, it actually starts moving to it and will get there. Sneaky! You do have to Abort Move yourself though...so something still makes the mountTest grumpy. |
| Ops Comments | none |
|---|
| TO Comments | Set 20150818034900.cur before starting to figure out which mirrors return DMI and TTC for each point of the 97 point test. 0.3 dust/humidity combo prevented opening. Applied above .cur file to SCS at EON. Unable to move structure as was alone by this time. Tracker parked lower left. |
|---|
| RA Comments | none |
|---|
| Observations | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| File | Target/QID | Exp Start | Exposure | Overhead | Program | Instrument Configuration | Data Type | IQ | Dimm | SkySBrt | Skytrans | SNR | Comments | Charge | |