|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stack Data | Did not stack | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Problem Reports | ||||
|---|---|---|---|---|
| PR Number | Times | Time Lost | Description | Response |
| 4274 | 01:36-01:43 | 00:07 | Probe assembly tab causes tcs gui to crash (ie go to desktop with tcs gui showing defunct in terminal). | Checked no other instances of tcs gui were running and restarted it. Could not get the tcs gui to stay running when going to that tab. Started to check positions with ./probesPos on htcs computer. |
| 4275 | 08:18-08:22 | 00:04 | uptime:51427.9 Aborted a trajectory and tried to go the the next target. I then hit go next to go to target from htopx and I recieved a "trajectory already active" error. Shortly after this tcs server went defunct. More details in the PR. | shut down tcs gui and all servers and restarted everything. |
| Ops Comments | none |
|---|
| TO Comments | Weather poor all night. High humidity and rain. Ran many cameras at the same time and did not run into any problems. ACQ was working well tonight also. |
|---|
| RA Comments | none |
|---|
| Observations | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| File | Target/QID | Exp Start | Exposure | Overhead | Program | Instrument Configuration | Data Type | IQ | Dimm | SkySBrt | Skytrans | SNR | Comments | Charge | |