| Problem Reports |
|---|
| PR Number | Times | Time Lost | Description | Response |
|---|
| 4146 | 23:15-23:30 | 00:15 | SAMS TRSE sky high (@24K+) and reporting -384ness on Seg 4. | Used .cur from first of last night, removed active sensors on Seg 4 (6:2) and THEN the TRSE dropped to @450. (Just the .cur took it down to 2200, I think it was) |
| 4021 | 01:15-01:20 | 00:05 | Louver bank 5 is stuck closed; tried opening but it didn't seem to respond. | left alone just in case it did open then didn't close again.... |
| 4146 | 01:20-01:58 | 00:38 | Found stack had 'blown-up' only a few mirrors being captured in HEFI or AOA; looked like focus was way off and way out... | Had to undo previous .cur file load and load most recent .cur file which made the mirror stackable and within stacking tolerances. |
| 4109 | 07:02-07:05 | 00:03 | In ControlDesk noticed a HFC and tried to clear it but ControlDesk became unresponsive; windows eventually stated it needed to close out the program; | closed the ControlDesk program; restarted program and then was able to clear the HFC and program responded as usual. |
| 1696 | 01:45-01:45 | 00:00 | sensors removed for LTSE | |
| 4106 | 07:41-08:45 | 01:04 | Large TTP on start of satellite tracjectory; Unable to capture TTC and acq image had really bad coma | shutdown and restarted htcs servers and tcs; |
| 4139 | 09:35-09:54 | 00:19 | trajectory for satellite 'directv 10' taking too long to load; never received a response after loading trajectory | tried moving structure and tracker slightly off and reloading; did not help;
Finally shutdown all servers and tcs and restarted; was able to load trajectory successfully. |