| Problem Reports |
|---|
| PR Number | Times | Time Lost | Description | Response |
|---|
| 4367 | 03:30-03:30 | 00:00 | Trying to start loop on tip/tilt camera failed with "Failed to set processing parameters" error. | |
| 4321 | 00:36:56-01:15:00 | 00:39 | Error Failed to adjust the trajectory for the current tracker position error displayed just after the go next command.
| Appeared to be a bad target from htopx since we sent another and had no problems. |
| 4135 | 04:03-04:10 | 00:07 | TMCS Failed to acquire trajectory. HFC fault just after hitting Go Next. | Reset fault and tried to reacquire the trajectory. This worked fine. |
| 4243 | 07:07-07:30 | 00:23 | The PAS went defunct and TCS Gui froze. We killed the TCS Gui, shut down the servers and restarted servers and Gui. | |
| 4351 | 23:43-01:03 | 01:20 | I was trying to move the Structure by using the Go Next button. It never moved its correct AZ position. It had a this TCS message on it:
| Called: Randy
He came up and fixed the problem by making changes in the legacy code. |
| 4135 | 09:10-09:18 | 00:08 | HFC faulted while cancelling the the trajectory at 54383.9 update time. | Reset the fault and used the lower right tracker preset as normal to get ready for stacking. |