|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stack Data | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Start | Stop | ee50 | ee80 | Hefi Focus | Mars Focus | Outside Temp | Dome Temp | Truss Temp | Wind Direction | Wind Speed | Stack Type | |
| 04:51 | 05:15 | 0.47 | 0.72 | 1013 | 938 | 21.7 | 21.7 | 22.2 | 215 | 10 | First of Night | |
| ↪ Comments | Mars X off by -2700 and Y -1300 in steps to find array | |||||||||||
| Problem Reports | ||||
|---|---|---|---|---|
| PR Number | Times | Time Lost | Description | Response |
| 0464 | 04:38-04:50 | 00:12 | TCS going slow; this was on jove and then tried htcs; | shutdown everything and brought it back up; switched between jove and htcs both seem slow but htcs seems to get slower faster. |
| 4100 | 05:25-05:30 | 00:05 | Galazy failed to load trajectory by using command line | moved on to next target |
| 4101 | 05:30-07:25 | 01:55 | kept getting the same error of no ephemiris file found... this would occur after go next button was pressed and tracker would fault out to this error | Called: Randy and Jason Called software team and they investigated; unsure as to what the issue is at this time... |
| 4102 | 10:30-10:30 | 00:00 | APC gui will not come up even after restarting APC server. Was unable check and/or turn off wavescope. | |
| Ops Comments | none |
|---|
| TO Comments | Running tonight on the new 2x dust closure criteria for 0.3 micron; really dusty/smoky night whenever we were open. |
|---|
| RA Comments | none |
|---|
| Observations | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| File | Target/QID | Exp Start | Exposure | Overhead | Program | Instrument Configuration | Data Type | IQ | Dimm | SkySBrt | Skytrans | SNR | Comments | Charge | |